@Sebastian_Schmidt wrote:
Hello,
i have install a clean win10 32bit with succsess on my t05.
But i have no sound, no graphic...
If i download and install the driver, it wont work...Always say:
Intel Atom Pricessor Z3000 Series - The plattform is not supported
Z3735F_win10 GPU? Driver - the system didnt have the minimal specswhat can i do?
King regards,
Sebastian
Posts: 1
Participants: 1
@Kaiwa wrote:
We are happy to announce, that we have finished R&D and Testing of Apollo Lake Stick PC.
It is small size like most of our products.High Capacity, and we have good controlled the temperature and did not effect its capacity.
First version is with N3350 CPU, 2G 32G, which with a good price.
N3450 4G 32G/64G is as an optional.Our USB type C adapter to USB3.0, Gigabit Lan, TF Card Reader, HDMI, Audio Port (earphone) and DP port finished. It support our T08 T09, and Macbook Air, All type C mobile phones.
Posts: 1
Participants: 1
@tpinkus wrote:
Sorry for sounding like a NUBEE.... but well I am. I just purchased a MeeGOPad T05 off Amazon and hooked it up to my TV via the HDMI. The problem is, when it starts, it wants to setup Windows 10 and I don't have a keyboard or mouse to do this. I did purchase a Bluetooth keyboard, but I'm guessing that's not going to work unitl I get Windows 10 setup.
ANY suggestions will be greatly appreciated.
Posts: 1
Participants: 1
@Chakradhar_Bandla wrote:
Can we access(mount) external hard disk to Remix OS MeegoPad device?
is it possible to read & write files to external hard disk or USB memory stick
Posts: 1
Participants: 1
@litek wrote:
Hi !
I have an Meegopad A02 Remix 2.0 and will not work with Logitech Keybord K400 ?
No problems with bluetooth keyboard
On my Megopad T01 and T02 with windows 10 it works fine with K400.
Any solution here ?regard
Litek
Posts: 1
Participants: 1
@litek wrote:
Hi !
When i try to start the movie in netflix i only have black screen.There is sound and text.
any solution here ?Regard
Litek
Posts: 1
Participants: 1
@madMark wrote:
Hello everyone!
Really need bios t08 (after recovery my device, it was installed bios from version T07 and normally does not work Wi-Fi and Bluetooth)
Can anyone backup it?
P.S. Bios from T09 - There are also problems
Thank you in advance!
Posts: 1
Participants: 1
@batpro wrote:
I have a T08. I had a T02 I before that worked great but it died.
The new T08 has a noisy fan and the bluetooth is terrible.
I am having constant problems with the intermittent bluetooth connection and it is almost impossible to use the T08. My old T08 worked perfect with my bluetooth keyboard.
I am using the Airfox K10 keyboard.
It connects to bluetooth but the typing is very intermittent. What can I do? Is it possible to return this T08 or is there a fix for this?
I feel like I just wasted money on this T08 that doesn't work as good as my old model.
Posts: 1
Participants: 1
@silverlp wrote:
So i have like 20 T02 laying around here. i need to put the same stuff on all of them (Windows 10 IoT Enterpise)
First thing i tried. Install 1, clone it to a external SSD. Boot another T02 from the SSD and Clone it on the T02 but well, the T02 cant boot from a external drive.
So i tried clonezilla and cloned it from the SSD to the T02 without Paragon and now i dont have any bootable media anymore.
Is there anyway to make this easier? installing all of the T02 one for one would take forever
Thanks for any tips
Posts: 1
Participants: 1
@Kaiwa wrote:
(Note: not everything is working, but i can say im writing this now from debian on the T09)
Okay, so, i've had a t09 laying around, and this time i decided i would try out linux on the box and i must say not all components are working but it is working pretty awesome, even better than windows for me!
(Also a wired connection is required, since wifi isn't working)
so lets start! first of all we need rufus and the ubilinux iso developed by up board team.
so first launch up rufus and select the ISO, set the partition scheme to mbr partition scheme for uefi & Select ISO mode (DD mode wont work)
Now, when you've finished creating the USB installer, shut down the device, plug it in and start while pressing F7 or DEL, if boot manager appears select the USB, if BIOS appears just go to the end (or almost) of the tabs and select boot override for the usb.
When the USB device has loaded, just install as normally,when finished it will try to boot into the desktop for the first time, now it might hang, just disconnect mouse, keyboard & ethernet adapter and restart, when booted to the login screen you can connect the mouse, keyboard & ethernet again!
Now, if you've encountered one of the following problems, you'll have to add some boot parameters to the grub loader
- Random mouse freezes
- Audio stutter while video playback
- USB disconnects while video playback
You could easily solve them by following my steps! Okey so lets start! hit WIN + R or just launch a terminal and do the following:
su^^ Will request the terminal to run as root, it will ask you for a password!
Okey, when you've succesfully requested root acces you want to open the following file with nano editor.
nano /etc/default/grub^^When opened the file search for "GRUB_CMDLINE_LINUX_DEFAULT="
and add the following parameter to it:intel_idle.max_cstate=1
usbcore.autosuspend=1
intel_pstate=disableWhen done, the line should look like the following:
GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_idle.max_cstate=1 usbcore.autosuspend=1 intel_pstate=disable"
Now to save the file hit CTRL + O press enter and exit the terminal.
Also i think there's a problem with chromium browser, not sure, but if you notice issues with HW acceleration in chrome then please uninstall it!
run terminal as root and run:
apt-get remove chromiumPS: i'll advise you to install firefox browser, working perfectly, youtube, sound (no stutter) flash games, unity games! can be easily installed from synaptic packetmanager!
Posts: 1
Participants: 1
@Fernando_Albertengo wrote:
As shown in the pics i've uploaded, downloaded the windows 10 x32 install from this forum, for my T02, copied it to my WINPE named usb stick, ran the cmd installation (success) then the device restarted itself, started getting ready to get on devices (dunno what devices, aside my pendrive and my wireless unified keyboard and mouse that worked perfectly fine before and after the install) and some seconds later "crashes" upon reaching 33% (turns itself off?!)
For the record, i tried twice, stopped right at 33%... whats wrong?
Also, is this a clean install? (i supposed that the diskpart clean command at install start must be a full wipe of the old OS)
It says that turned off unexpectedly, ruining something badly..
Posts: 1
Participants: 1
@Fernando_Albertengo wrote:
Back again with a new problem.
Yeah really..
Managed to install win10 x32, worked perfectly fine, and ventured to the dual booting world, with Android. Everything went well when installing android, launched it, and i had a brand new giant tablet and my living room. Installed some apps and then, the nightmare begun...
"Not enough space" Android said,"-wait what? its a 6GB partition!"
Ran to settings... 900MB Total Storage Size.
"-Holy s***, if its not 6GB, then it must be another partition... oh noes, what i've destroyed then???"
Rebooted, tried to find windows on boot manager, there it was, selected, hit enter praying to the gods and...
"Error [bunch of text saing i'm missing something veeery important]" auto-reboots to boot manager, only android appears now.
"-Okay, no problem, i just have to install windows again" [sets up WIPEN again and boots]
Pendrive not detected [ctrl+alt+del] still not detected [repeats a handful of times]... "-F*CK!".Guesses:
1. That almost-1-GB-partition was the T02 recovery.
2. The overwritten partition was not BIOS because it works and even opens boot device selection window on F7.
3. And it was not the Windows locked partition because it uses 100MB, and the one i've overwritten was 9 times bigger.
4. Might, just might, have touched GRUB2 Ok option when installed Android, wich tutorial said to skip.Facts:
1. Windows boot manager still appears on screen, but leads to android.
2. Built in EFI Shell stills alive.
3. BIOS is alive.
4. Windows, diedededed.
5. Android, working fine.
6- Actual boot menu:Please select boot device
- -UEFI: built in EFI Shell. <- Works as always.
- -Windows Boot Manager. <- Leads to low resolution Android boot.
- -UEFI OS. <-Leads to high resolution Android boot.
- -Enter Setup. <-Leads to BIOS, as always.
Uhm... now what?
Posts: 2
Participants: 1
@Chev_Campbell wrote:
I just bought T09 and the TF slot does not work. the windows is missing is missing DLL's as well. I cant find a windows iso or key for my device. help i need to reinstall
Posts: 1
Participants: 1
@uzi1966 wrote:
hi i have meegopad t05 z3735f and suddenly i dont have win 10 when i power on he show me word shell and i have to write command but win 10 not show, i understand that i have to install again win 10 so how can i do it im stuck with intel stick that not have win 10.
please help
Posts: 3
Participants: 2
@teicang wrote:
Hi all, I have the WIN 8.1 SO and I am experimenting a really instable wi-fi connection.
The connection is established and work but after minute is not possible to connect with internet.
Some time during the test windows say no default gateway configured, it' fix the problem and the connection goes back to work..but after minute it block again.
At the beginning I never seen this type of problem so I suppose it depends from some last update loaded.
I tryed to update realtek wifi driver but nothing change.
Any suggestion?
thanks
\Gianni
Posts: 1
Participants: 1
@sebas wrote:
Hola, tengo el modelo T05, El cual no puedo utilizar ya que estaba realizando una actualizacion a windows 10 cuando este proceso se interrumpio. Ahora solo puedo ver en la pantalla de inicio al encender el equipo la siguiente informacion:
EFI Shell Version 2.31 {5.8}
Current running mode 1.1.2
Device mapping table
blk0 : Blockdevice - Alias (null)
blk1 : Blockdevice - Alias (null)
blk2 : Bolckdevice - Alias (null)Press ESC in 1 seconds to skips startup.nsh, any other key to continue.
No he podido actualizar la bios ni tampoco iniciar un a nueva instalacion de windows.
NO entiendo como comunicarme con la consola shell,
Cuando booteo el equipo no me permite seleccionar y entrar al pendrive.
cualquier orientacion, se las agradezco.
Posts: 1
Participants: 1
@koalexx wrote:
Hi! At me т05, win10. When connecting any headset has a sound, but does not work the microphone. I ask advice
Posts: 3
Participants: 2
@eas187 wrote:
My T05 device suddenly does not exceed 2 Mb of velocity (my home network has 24 Mb). It is important to mentione that my device previuosly worked normaly. Thanks
Posts: 1
Participants: 1
@anjesh wrote:
Hey would it be possible to install windows server 2016 on the T02?
Posts: 1
Participants: 1
@Kaiwa wrote:
This forum will be under construction! ofcourse it will be still accesable but all the old threads will be moved to an archive thread, there will be more specific device related threads, and specific areas for questions!
This way, you will find drivers & BIOS files and other kind of software more easily! so the next few day.. topics may move! (depends on how much topics there are XD)Greetingz,
- Kaiwa
Posts: 1
Participants: 1
